Industrial, Manufacturing & Operational Systems
epub, pdf |eng | 2010-03-08 | Author:Michael J. Best [Michael J. Best]

( Category: Production, Operation & Management March 9,2020 )
epub |eng | | Author:John M. Dealy & Jian Wang

Whenever possible, calibration should be based on the measurement of basic quantities such as torque and angular displacement. Scatter in results from several tests arise mainly from variations in gap ...
( Category: Polymers & Textiles March 9,2020 )
epub |eng | 2015-03-08 | Author:Alexandru C. Telea

8.4 Grid-Processing Techniques Grid-processing techniques are methods that change both the grid geometry (locations of grid sample points) and its topology (grid cells). By “grid-processing techniques,” we mean those techniques ...
( Category: Ergonomics March 9,2020 )
epub |eng | | Author:Frank Kirchner & Sirko Straube & Daniel Kühn & Nina Hoyer

Methods Modular System Design To achieve reconfigurability, reusability, and versatility of manipulators and their underlying components, we propose a modularized approach to manipulator system design. The DFKI has already pursued ...
( Category: Robotics & Automation March 9,2020 )
epub, pdf |eng | | Author:Gianluca Antonelli

67. J. Nie, J. Yuh., E. Kardash, T. Fossen, On-board sensor-based adaptive control of small UUVS in very shallow water. Int. J. Adapt. Control Signal Process. 14(4), 441–452 (2000) 68. ...
( Category: Robotics & Automation March 9,2020 )
epub |eng | | Author:Da-Wei Gu, Petko H. Petkov & Mihail M Konstantinov

( Category: Robotics & Automation March 9,2020 )
epub |eng | | Author:David Wagg & Simon Neild

4.6 Chapter Notes The aim of this chapter was to provide an introduction to many of the approximate nonlinear analysis techniques. A case study is provided in Chap. 7, in ...
( Category: Robotics & Automation March 8,2020 )
epub |eng | 2014-03-07 | Author:Donald Norris

Telemetry The DX-8/AR8000 R/C system has an optional feature that provides telemetry in addition to normal control functions. Telemetry is the automated transfer of data from the aircraft back to ...
( Category: Software Development March 8,2020 )
epub |eng | | Author:Jonathan Kern [Kern, Jonathan]

On the Air Many people have a hand in putting together any one newscast—producers, editors, and anchors. But the listener only hears one of them—the anchor. We can and should ...
( Category: General March 7,2020 )
epub |eng | 2019-05-31 | Author:Conner, James [Conner, James]

Program Explaination: 8. IR Infrared Obstacle Avoidance Sensor Module Project Arduino Line Follower Robot A Line Follower mechanism, because the name suggests, is an automatic target-hunting vehicle, that follow a ...
( Category: Robotics & Automation March 7,2020 )
azw3 |eng | 2018-09-27 | Author:William C. Dunn [Dunn, William C.]

9.5.1 Offset Zero Figure 9.15a shows the output of a sensor when measuring a variable and the idealized output obtained from a linearization circuit with adjustment of the bias (zero ...
( Category: Industrial Technology March 6,2020 )
epub, azw3 |eng | 2012-07-17 | Author:Henry T. Brown [Brown, Henry T.]

292. Stud escapement, used in large clocks. One pallet, B, works in front of the wheel and the other at the back. The studs are arranged in the same manner, ...
( Category: Industrial Design March 6,2020 )
azw3 |eng | 2017-09-07 | Author:Sanjeev Dwivedi & Rajeev Dwivedi

To create a myblock, it is necessary to first write a program using variables where the distance is provided as a variable (let’s call it distance) and the Moving straight ...
( Category: Robotics & Automation March 6,2020 )
epub |eng | 2014-11-06 | Author:Jason Babler [Jason Babler]

( Category: Industrial Design March 6,2020 )
epub |eng | 2014-03-24 | Author:Mark Frauenfelder [Mark Frauenfelder]

( Category: Electronics March 6,2020 )